Bright pavers and freshly sanded joints
Paver Cleaning and Joint Sand in St. Johns, FL
One call to (904) 552-3813 starts a free paver cleaning estimate in Saint Johns.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligations.
Who can clean my pavers in St. Johns, and how quickly?
A local contractor cleans pavers across St. Johns, FL, and a reply arrives within 1 business day, usually much sooner. Fresh joint sand comes with the job, and the estimate is free with no pressure to book. To begin, call (904) 552-3813.
Cleaning clears off the haze, rust and green film that dull a newer home's pavers, so the surface looks crisp and grips better underfoot. Fresh sand then refills each joint, which firms up the surface and leaves weeds no room. The pool deck that has looked gray since the first summer can look like the day the house was finished. Show the contractor the problem spots when you request your free quote.
Paver Sealing St Johns Is Proud to Serve Northeast Florida
What comes with paver cleaning in St. Johns?
The job covers stain treatment, a careful wash and new joint sand after the pavers dry. It works on its own or as the first stage of sealing. Pool decks, garage aprons and spots near sprinkler heads tend to need the most attention. To reach a contractor for this work, call (904) 552-3813.
Pretreatment
A cleaner suited to the stain goes on first and is tested on a small area so the color stays true.
Careful washing
A surface cleaner gives an even pass, or a wide fan tip stays low, so joint sand is not blasted out.
Joint sand
New sand is swept in once the surface dries, then settled to lock the pavers.
Optional sealer
A coat can follow when everything is dry. The sealing guide explains the benefits.
What tells me my pavers need a cleaning?
Clues include a gray or white film, orange marks near sprinklers, brown stains under trees, weeds in the joints and sand on the driveway after rain. Green growth comes first on the list, since a slick pool deck is a real safety risk. To have yours looked at, call (904) 552-3813.
Is a cleaning enough, or should sealing follow?
Cleaning restores the look, and sealing helps it last. Stopping at a clean costs less now, but the pavers stay open to the next round of rust, mildew and sun. Adding a sealer makes later cleanings easier, with a fresh coat due every few years. Share which way you are leaning when you request your free quote.
How often do St. Johns pavers need cleaning?
Once a year is a good rhythm for most homes. A Jacksonville paver company that works in ZIP 32259 recommends a yearly cleaning between sealing jobs. Pool decks that lose sand each summer and drives under oaks may need it more often. To plan a schedule for your home, call (904) 552-3813.
Will a stronger spray get pavers cleaner?
No, more force does more harm than good. Western Interlock, a paver company, targets about 1,500 PSI, and the Concrete Masonry and Hardscapes Association says a large amount of water does more on the rinse than high pressure. Too much force tears sand out of the joints and can mark the paver face. Ask about pressure and nozzle size when you request your free quote.
The right tools matter too. The association cautions that steel bristle brushes shed bits that rust and leave stains, and that strong acids can shift paver color, so testing a small spot comes first. A contractor who can explain those choices is showing you how carefully the job will be done, so to ask about them, call (904) 552-3813.
Why does construction haze need to come off first?
Haze from mortar and building dust sits on top of new pavers and dulls them. A washing company that works in St. Johns says many homes here have not had a proper first wash yet, and that sealing over haze makes problems pile up. Getting the first cleaning right sets up every cleaning after it. To have new pavers checked, call (904) 552-3813.
Which surfaces around my home can be cleaned?
Washing works on the driveway, pool deck, lanai and front walk alike. Each one collects different grime, so the approach shifts from surface to surface. To start with yours, request your free quote.
Driveways and aprons
Daily parking, oil spots and sprinkler overspray all land on the driveway. Cleaning here keeps the surface even and the joints full where tires turn.
Pool decks
Splash, chlorine and bare feet put pool pavers through a lot, and summer storms pull sand from the joints. Cleaning by the water should leave the deck safe to walk on.
Lanais and patios
Covered seating areas stay shaded, so green film and dirt hang on. Cleaning on a patio aims at that buildup and the gritty joints around it.
Entry walks
Front walks pick up mulch, soil and dripping planters. Cleaning at the entry is a quick change that shows from the street.
What dirties pavers around St. Johns?
Construction haze, pool deck sand loss, irrigation rust, oak tannin and sun fading lead the list here. Cleaning takes care of several, while sealing or repairs handle the rest. To find out which apply to your home, call (904) 552-3813.
1. Haze left from building
A washing company working in St. Johns says many homes here still carry construction dust, mortar haze on new pavers and irrigation rust. Sealing over that haze makes the next round of trouble worse.
2. Pool decks losing sand
The same company sees pool decks in the newer villages give up their joint sand each summer. The Concrete Masonry and Hardscapes Association says paving hit by regular heavy rain benefits from stabilized joint sand.
3. Rust from new irrigation
Most Florida well water is rich in iron, UF/IFAS Extension reports. Sprinklers aimed at garage aprons and walks leave orange marks that a rust remover has to lift before sealing.
4. Tannin under older oaks
In the northern part of St. Johns, live oaks still shade many drives, and that washing company notes those drives turn brown with tannin. Those stains need their own treatment.
5. Fading in open sun
A Jacksonville paver company says full sun, sandy ground and hard summer rain wear down pavers in ZIP 32259 over a few years. Unsealed color goes chalky first on open drives.
How much does paver cleaning cost in St. Johns?
A St. Augustine company serving St. Johns County lists basic washing at $0.75 to $1.50 per square foot and deep cleaning with stain removal at $1.00 to $2.00. For a 600 square foot driveway, that comes to about $450 to $900 for a basic wash. For a number on your pavers, request your free quote.
Thinking about sealing at the same time? Ask for a combined price. That company's full wash and seal package runs $1.50 to $3.00 per square foot. To weigh one against the other, call (904) 552-3813.
Want the pavers protected too? Read about sealing your pavers, look over the communities covered or return to St. Johns paver sealing.
| Paved area | Washing | Deep clean | Wash and seal |
|---|---|---|---|
| 300 sq ft | $225 to $450 | $300 to $600 | $450 to $900 |
| 600 sq ft | $450 to $900 | $600 to $1,200 | $900 to $1,800 |
| 1,000 sq ft | $750 to $1,500 | $1,000 to $2,000 | $1,500 to $3,000 |
All three columns use the per square foot rates a St. Augustine company serving St. Johns County published, read in November 2026. Larger jobs often come in lower per square foot, and local quotes will vary.
Why choose a contractor who knows St. Johns for cleaning?
A contractor who works around St. Johns knows what new construction, sandy soil and well water leave on pavers. You can compare the quote with the published rates and take your time deciding. To begin, request your free quote.
Contractors who work the county
A company that covers St. Johns knows the newer subdivisions, the older oak streets and the association rules that come with both. That saves time on the first visit.
Nothing owed for the estimate
The look and the price are free. Turn the quote down and nothing more happens.
Prices you can check
St. Johns County companies publish their square foot rates, and you will find them on this site. A quote far outside them is worth a question.
Decide on your own clock
Ask for the number in writing and take the time you need. Our contractor standards list what to confirm before you sign.
Want a free paver cleaning quote?
Call or send a short note, and a reply follows within 1 business day, usually much sooner.
Free, no obligations
What happens during the paver cleaning process?
Cleaning moves through clear steps, from the first look to a last check. Without sealing, the job wraps up once the joints are filled. To set a date, call (904) 552-3813.
1. Look before pricing
The contractor walks the area before quoting the cleaning job, noting dips, broken pavers, old sealer and any spot where water pools.
2. Prep and wash
Plants and screens get protected and the irrigation goes off. The pavers are washed with a surface cleaner or a wide fan tip held low so the joints keep their sand.
3. Work on stains
Rust, tannin, mortar haze and efflorescence each get a cleaner suited to them, tried on a small area first.
4. Sand the joints
When the pavers are dry, joint sand gets swept in and settled with a plate compactor, and a blower clears what is left.
5. Coat and review
If you chose sealer, it goes on with a low pressure sprayer and a roller. The contractor then walks the job with you and explains how long to stay off it.
Frequently Asked Questions
How much does it cost to clean pavers?
In St. Johns County, basic washing runs $0.75 to $1.50 per square foot and deep cleaning with stain removal $1.00 to $2.00, according to a St. Augustine company that serves the county. A 500 square foot patio would come to about $375 to $750 for a basic wash. Joint sand and repairs can add to that.
Is it a good idea to pressure wash pavers?
Yes, when it is done with moderate pressure and the joints get new sand afterward. The paver company Western Interlock recommends roughly 1,500 PSI. A blast at full power can scar the face of softer pavers and strip the joints bare.
How can I get my pavers clean?
The most reliable route is a professional cleaning that matches the method to the stain. A contractor pretreats algae, rust or tannin with a paver-safe cleaner, washes with a surface cleaner, then refills the joints with sand.
Can I pressure wash my paver patio?
Yes, a paver patio handles a pressure wash when the spray stays wide and the angle stays low. Unilock's care guide keeps the wand within 30 degrees of the surface so the joints hold their sand. Count on new joint sand once the patio has dried.
Why do pool decks in St. Johns lose joint sand?
Summer storms carry loose sand out of the joints, and pool splash adds to it. A washing company that works in St. Johns says pool decks in the newer villages lose sand from their joints each summer. The Concrete Masonry and Hardscapes Association says stabilized joint sand helps where heavy rain is regular.
What causes orange stains on newer St. Johns driveways?
Iron in irrigation water is the usual cause. UF/IFAS Extension says most Florida well water carries high levels of iron, and a washing company that works in St. Johns has found that rust on sidewalks and garage doors in the newer communities. A rust remover made for pavers clears it before any sealer goes on.
Can tannin stains from oaks be removed in St. Johns?
Usually, yes. A washing company that works in St. Johns says drives in Fruit Cove and Julington Creek turn brown under live oaks, so it runs a surface cleaner and then treats what water alone will not lift. UF/IFAS Extension adds that water oak acorns can stain concrete.